2019 Viking 68 Enclosed Bridge

• 2019 Viking 68 Enclosed Bridge.
• Four-stateroom layout, five head
• Palm Beach Tower
• Forward VIP crossover bunk arrangement.
• Enclosed flybridge.
• Gloss finish throughout.
• Interior wood specified as walnut.
• Classic accessory kit and premium décor package.
• Custom Kingston Grey gelcoat hull color.
• Black bottom paint.
• Two-tone Moccasin White headliner, including hull sealers and companionway walls.
• Brushed nickel hardware, coverplates, and satin nickel interior light trim throughout.
• Length Overall (LOA): 68 ft. 7 in.
• Beam: 19 ft. 2in.
• Draft: 5 ft. 5 in.
• Displacement: 115,306 lbs.
• Fuel Capacity (Optional): 2,377 gals.
• Water Capacity: 344 gals.
• CAT C32A Main Engines with CAT 360 Controls (Roughly 2600 hours)

• Engine room paint color Snow White.
• Additional 120V freshwater pump plumbed in parallel.
• CAT C32A main engines with CAT 360 controls.
• Two Onan 29 kW generators.
• 24V fuel-priming pumps.
• Additional fuel tank configuration for a total of three tanks.
• Back-up fuel transfer pump plumbed in parallel.
• Headhunter fresh-water pump and back-up fresh-water pump.
• Back-up seawater pump plumbed in parallel.
• Hydraulic system and thruster.
• Hydraulic tiller arms and related lazarette components.
• Screens installed for seawater pickups.
• Dometic X2 Spot Zero combination unit.
• Additional Octoplex equipment in the engine room.
• Two engine-room tool boxes / drawer storage.
• Dedicated engine-room clean-up / wet-vac arrangement.
• Engine-room floor treatment specified with black rubber diamond material.

• Release teak helm pod at aft station.
• Enclosed flybridge with electronic single-lever controls at the helm pod / aft station.
• Teak helm pod at the aft station.
• VHF radio: Icom IC-M64.
• Armrests installed on port and starboard jump seats.
• 110V outlets with USB ports at the helm.
• Starboard cabinet shelf added.
• Upgraded flybridge sofa in Dewberry.
• Custom counter / storage box at starboard side.
• Temporary horn mounting under the bridge and preparation for electric teaser reels.

• Release Marine fighting chair.
• Cockpit freezer bait trays.
• Freezer storage in mezzanine seat.
• Second Cablemaster in cockpit.
• Cruisair Cool Breeze mezzanine air system.
• Transom livewell.
• 30 amp outlet forward under coaming for teaser reels.
• Teak cockpit and mezzanine
• Seakeeper 26 Gyro Stabilizer
• Run Hours: 3467
• Sea Hours: 2628
• Two on-deck livewells with associated plumbing / fittings.
• Transom swim steps.
• 24v Electric Reel plugins
• Crushed-ice machine with discharge to the starboard mezzanine box.
• Six rod holders total, three in each haunch.
• Fish-box dividers and split-lid fish-box arrangement.
• Refrigerated port and starboard mezzanine step boxes.
• Cockpit freezer
• Refrigerated sole fish boxes on port and starboard sides.
• Full-length starboard fish box.
• Dedicated pumps in the lazarette for tuna tubes
• Storage lockers under port and starboard coamings.
• Tri-color lights at aft-deck overhang and rope lighting under the coamings.
• Scuppers threaded for on-deck livewell drain.
• Custom cockpit cover with sides and cockpit sunshade.
• One-piece seat back and cushion for tackle-center locker.
• Fiberglass divider in the port mezzanine box with additional drain and hatch.

• Seakeeper SK 26 gyro stabilizer.
• Fresh-water washdown at the bow inside the anchor locker.
• Running, transom, and mast-light arrangements for the tower.
• Anchor bracket in anchor locker.
• Custom non-metallic boot stripe.
• Grab rails under forward corners.
• Forward Bomar hatch.
• Light with switch in the forward locker.
• Custom cover for the black mask.
• Custom faux toe rail.
• Custom faux transom
• Custom Kingston Grey hull gelcoat.
• Black bottom paint.
• Bow cleats configured fore and aft.
• 300 feet of line with 12 feet of chain and shackle specified in place of the standard arrangement.

• Undercounter refrigerator and freezer drawers (6 total)
• Stainless-steel undermount sink.
• Surface-mount induction range with two larger burners.
• Custom Amtico flooring in Dark Walnut straight-plank pattern with silver-stripping insert.
• Custom galley countertop material specified as Cambria.
• Galley overhang.
• Satin-nickel faucet.
• Dimmer controls for overhead LED lighting.
• Pull-out trash can
• Spill edge at galley countertop.
• Storage shelves built into pantry / brow area.
• Cambria dinette table / matching countertop treatment.
• 1/2-inch bullnose countertop edge detail.
• Sub-Zero refrigerator / freezer drawer arrangement.
• Backsplash specified as Avalon tile with iridescent 1 x 4-inch tile.
• Storage box for coffee maker.

• Electrical panel up.
• Mirror on aft side of galley island.
• Marine Power Electric salon power door
• Wood treatment on aft side of galley island
• Wood dinette table with wood pedestal.
• Quartz-light dimmers.
• Custom Amtico Dark Walnut flooring at salon entranceway.
• AC receptacle under dinette table.
• Wood wire boxes and wood strips in salon headliner.
• Custom horizontal wood treatment in companionway.
• Shelving added in the central-vac locker.
• Walnut sealer at headliner above the port credenza.
• Salon day head with custom Amtico flooring.
• Brushed-nickel towel bars and rings; satin-nickel faucet.
• Triangle cabinet between sofa and dinette with hinged top.
• Switch for fighting-chair lights in electrical panel.
• Light-filtering blinds, including ivory herringbone material.
• Cambria top for salon cocktail table with storage.
• TV on the salon forward bulkhead.

• Viking Slumber mattress.
• Dimmer controls on overhead LED lights.
• Wood face on lower vanity.
• Frameless glass shower door.
• Custom Amtico Dark Walnut flooring with silver-stripping insert.
• Satin-nickel shower fixtures and faucet.
• Brushed-nickel towel bars and rings.
• Cambria vanity top with bullnose edge.
• Drawers added to night tables.
• Crown molding in place of standard treatment.
• 24-inch entry door configured to swing aft
• Additional locker shelving and hamper arrangement.
• Raised hanging-locker shelf and additional shelf.
• Wood panels above the nightstand.
• Custom sconces.

• Viking Slumber mattress.
• Dimmer controls on overhead LED lighting.
• Frameless glass shower door.
• Custom Amtico Dark Walnut flooring.
• Satin-nickel shower fixtures and faucet.
• Brushed-nickel towel bars and rings.
• Wood face on lower vanity.
• Cambria vanity top with bullnose edge.

• Wood locker tops and wood drawer-storage tops.
• Additional 110V outlet.
• Dimmer on overhead LED lights.
• Single Viking Slumber crew mattress.
• Wood face on lower vanity.
• Custom Amtico Dark Walnut flooring in crew head.
• Chrome shower door.
• Satin-nickel shower fixtures and faucet.
• Brushed-nickel towel bars and rings.
• Exhaust fan in crew head.
• Cambria vanity top with bullnose edge.
• Engine room Access Door

• Dimmer controls on overhead LED lights.
• Viking Slumber mattress.
• Custom Amtico Dark Walnut flooring in port head.
• Chrome shower door.
• Satin-nickel shower fixtures and brushed-nickel towel bars / rings.
• Satin-nickel faucet.
• Wood face on lower vanity and wood locker storage top.
• Granite vanity top, with a later Cambria custom vanity-top.
• Exhaust fan in port head.
• Drawers installed under bunk with lift-top replaced by hatch.

• Premium décor package
• Upgraded Dewberry salon sofa with single roll-back and storage arm
• Custom wallcovering / wallpaper material
• Custom headliner material throughout the boat.
• Brushed-nickel hardware throughout.
• Brushed-nickel coverplates for switches and receptacles.
• Satin-nickel interior light trim throughout.
• Fabrica Beverly Hills carpet, Ventura double-twist, in the specified décor package.
• Double carpet padding.
• Stidd helm chair specified in Brisa-Black Onyx.
• Companion chairs specified in Brisa-Birch.
• Aft bridge bench seat and mezzanine cushions specified with Garrett leather / custom upholstery selections.
• Ivory linen selection and an extra set of ivory sheets.
• Three barstools with backs, Brisa-Birch / walnut-veneered seat bases.
• Carpet runners throughout
• Genuine leather upgrade for mezzanine.

• Furuno 25 kW / 96-mile digital radar with 6-foot array
• Furuno NavNet TZT2BB black-box navigation system and processor/controller
• Garmin GPSMAP 9224 multifunction display (New 2026)
• (2) 19-inch Seavox touchscreen display
• Garmin GPSMAP 8530 black-box navigation system with preloaded charts
• Furuno FCV1900 sounder
• Garmin GSD CHIRP sounder module
• Airmar tournament-series transducer package
• Furuno NavPilot 711 autopilot
• Icom IC-M605 VHF communications package
• KVH TracVision HD7 satellite television
• GOST / Survision camera and monitoring system with 8-channel recording
• Garmin GPSMAP 7612 TS tower multifunction display
• Seavox 17-inch aft-station touchscreen display
• Yacht Beam high-definition searchlight
• Fusion and JL Audio marine entertainment systems

• Tuna Tower 68' Enclosed Bridge, 7' Gap, Brushed Pipe
• (2) Antenna stand-offs
• Center ladder
• Molded standing platform with coupler box on platform
• Rigid Industries 20" RDS LED light bars with diffused lenses and Hi/Lo feature, mounted in custom molded light pods — aft and forward
• 63" control box with flush-mounted compass
• Recessed electronics box with lid, port-side control box
• Control box top painted satin black
• Molded tower sunshade with internal tracks and welded antenna mounts
• Sunshade frame painted satin black
• Bellyband cushion upgraded to Rybo Style
• Corner seats with cushions below belly ring
• Antenna mount SAT TV dome, molded fiberglass
• Stern light molded into aft bridge overhang (hooked up)
• Hook-up for (3) spreader lights
• Anchor light installed under control box
• DHR 5-mile masthead light on tower sunshade
• Rupp 43'-3" spreader "Big Riggs HD" outriggers with heavy AFT bar
• Rupp outriggers
• Rupp rollers on outriggers
• Rupp center rigger
• Rupp hydraulic system — with hydraulic locks
• Recessed center ladder
• Bridge rail, 3-sided, triple AFT, 1-1/4" pipe
• Polished rod holders welded to rail, PBT style
• Tower horizontal safety rail
• Controls and steering for CAT 360 engines with Viper electric steering
• Navigation lights molded P&S into platform
• Trim-tab switch on control box
• CAT standard bow-thruster control mounted on control box
• Fresh-water outlet in tower
• Pair Romad Activa Tach's mounted on control box
• Flagstaff under each side platform perimeter rail
• Recessed tri-color lights in tower platform
• Recessed tri-color lights in tower sunshade
• Wired tri-color lights for tower platform and sunshade
• Bond tower
• Pair Rupp Marine halyard grommets mounted in gunnels
• Control box cover
• Miya Epoch Super US9 HDR electric teaser reels with remotes
• Electric teaser reel remotes wired to tower control box
• All exterior aluminum, including outriggers, finished in Clear Kote
• Tower belly-ring cushions and corner seats wrapped in custom Garrett leather

Listing MLS by Yachtr.com